|
How Do They Work?
The following is a basic explanation of how a heat pump works.
Overview
Heat pumps move stored solar energy from the ground into the home to
provide a total solution for Domestic Hot Water (DHW) and all
heating needs.
Because heat pumps simply move energy, rather than creating it by
burning fossil fuels, they are very efficient. For every 1KWhr of
electricity consumed by the heat pump it can produce 4KW of heat.
This gives an efficiency of 400% sometimes stated as a Co-efficient
Of Performance (COP) of 4:1.
Collecting the Heat
Heat collection is achieved by installing a series of pipes in the
ground. They are buried a metre deep and contain a water glycol mix
at a low temperature. The surrounding soil is at a higher
temperature, typically 10-13oC and gently warms the glycol mix as it
is pumped around the ground loop.
A temperature increase of the ground loop fluid of just 3 or 4
degrees is all the heat pump requires. The returning warmed liquid
is fed into a heat exchanger/Evaporator.
The Evaporator
The purpose of the Evaporator is to take the collected heat out of
the ground loop liquid and return it cooled to the pipe for the next
cycle. It does this by using a refrigerant that boils at
approximately -10 Celsius, the act of boiling turns the refrigerant
into a vapour which is then moved into the Compressor.
The Compressor
The Compressor does exactly what its name suggests; the vapour is
compressed in volume and as its volume reduces its temperature
increases. Temperatures of between 75 and 125 Degrees Celsius are
achievable and the gas is then fed through a heat exchanger.
Condensor/heat exchanger
Feeding the hot gas through a condenser allows the refrigerant to
turn back into a liquid. As it condenses it cools and releases its
heat through a heat exchanger into the DHW and central heating
system.
The Expansion Valve
To complete the closed circuit of the heat pump the only thing which
needs to be done is reduce the pressure of the condensed liquid and
this is done via an Expansion Valve. |